Description

Fluke 368 FC OffersFeatures

True RMS measurements for accuracy when measuring complex, non-sinusoidal waveforms
1.6″ (40 mm) jaw opening
Highest resolution of 1 µA, measure up to 60 A
Selectable filter function removes unwanted noise
Max/Min/Average readings and hold function
Forward-facing LED work light for use in dark wiring cabinets
Backlit display; auto backlight off and auto power off for extended battery life
Internal Memory Logging: up to 65,000 measurement points
CAT III 600 V safety rating

Reduce downtime – find leakage currents without taking equipment offline

This True RMS leakage current clamp meter helps users detect, document, record, and compare leakage current readings over time as a means of preventing unplanned downtime, and identifying intermittent GFCI and RCD trips, all without taking equipment offline.

It features a large 1.6″ (40 mm) diameter jaw for work with large conductors. The jaw is fully shielded to capture very small leakage signals and minimize external electromagnetic interference.

Also, this product offers wireless data connectivity via Fluke Connect, which enables you to track changes in leakage current over time, helping you to identify potential problems before they turn into major failures.Fluke 368 FC OffersFeatures

True RMS measurements for accuracy when measuring complex, non-sinusoidal waveforms
1.6″ (40 mm) jaw opening
Highest resolution of 1 µA, measure up to 60 A
Selectable filter function removes unwanted noise
Max/Min/Average readings and hold function
Forward-facing LED work light for use in dark wiring cabinets
Backlit display; auto backlight off and auto power off for extended battery life
Internal Memory Logging: up to 65,000 measurement points
CAT III 600 V safety rating

Reduce downtime – find leakage currents without taking equipment offline

This True RMS leakage current clamp meter helps users detect, document, record, and compare leakage current readings over time as a means of preventing unplanned downtime, and identifying intermittent GFCI and RCD trips, all without taking equipment offline.

It features a large 1.6″ (40 mm) diameter jaw for work with large conductors. The jaw is fully shielded to capture very small leakage signals and minimize external electromagnetic interference.

Also, this product offers wireless data connectivity via Fluke Connect, which enables you to track changes in leakage current over time, helping you to identify potential problems before they turn into major failures.

Fluke 368 FC Specifications

Electrical Specifications

Measurement Function
Alternating current

AC Ampere Range
3, 30, 300 mA

3, 30, 60 A

Range Selection
mA/A: Manual selection

3/30/300 mA: Automatic selection

3/30/60 A: Automatic selection

Range/Resolution
3/0.001 mA

30/0.01 mA

300/0.1 mA

3/0.001 A

30/0.01 A

60/0.1 A

Accuracy – Filter Activated (40 to 70 Hz), Filter Off (40 to 1 kHz)
3 mA to 30 A: 1% + 5 digits

60 A: 2% + 5 digits

Frequency
40 Hz to 1 kHz

Crest Factor
3

General Specifications

Display (LCD)
Digital readout: 3300 count

Display Refresh Rate
4 times/sec

Maximum Conductor Diameter
1.6″ (40 mm)

Battery
2 x AA, IEC LR6, NEDA 15A, alkaline

Battery Life
Expected battery life, without using backlight and spotlight, is more than 150 hours

Automatic Shut-Down
Meter automatically shuts down after 15 minutes of inactivity

Operating Temperature
14 to 122°F (-10 to 50°C)

Storage Temperature
-40 to 140°F (-40 to 60°C)

Operating Humidity
Non-condensing at <50°F (<10°C) 90% relative humidity at 50 to 86°F (10 to 30°C) 75% relative humidity at 86 to 104°F (30 to 40°C) 45% relative humidity at 104 to 122°F (40 to 50°C) Operating Altitude 6561.7' (2000 m) Storage Altitude 39,370.1' (12,000 m) Dimensions 9.2 x 4 x 1.8" (234 x 101 x 46 mm) Weight 1.1 lbs (500 g) Safety Specifications General Safety IEC 61010-1: Pollution Degree 2 Measurement Safety IEC 61010-2-032: CAT III 600 V/CAT IV 300 V Current Sensor Action Category IEC 61557-13: Class 2, ≤30 A/m Click here for complete specifications on the Fluke 368 FC What's included with the Fluke 368 FC Clamp Meter Carrying Case 2 x AA Batteries Manual See it. Save it. Share it. All the facts, right in the field. Fluke engineers have delivered an innovative mobile platform and tool that helps solve everyday problems, allowing you to instantly document measurements, retrieve historical data, and share live measurements with your team. All handled by the Android™ or iOS smart phone you already carry. Fluke Connect with ShareLive™ video call is the only wireless measurement system that lets you stay in contact with your entire team without leaving the field. The Fluke Connect mobile app is works with over 20 different Fluke products - the largest suite of connected test tools in the world. Make the best decisions faster than ever before by viewing temperature, mechanical, electrical and vibration measurements for each equipment asset in one place. Get started saving time and increasing your productivity. Fluke Connect Features: TrendIt™ Graphs: Use graphing to show changes in measurements, allowing you to graph and show problems instantly. EquipmentLog™ History: Access equipment history building a database of equipment health and baselines with cloud backup. ShareLive™ Video Calls: Save, collaborate and share measurements instantly with your team anytime, from anywhere. AutoRecord™ Measurements: Instantly save measurements to your phone with Cloud backup. Fluke Cloud™ Storage: Securely access equipment records anywhere, anytime. Fluke Connect Benefits: Maximize uptime Minimize maintenance costs Better assessments with accurate records Higher efficiency with less walking around; no notebook and excel needed Share troubleshooting knowledge live Create and share helpful content in the field Access to Fluke digital product manuals means no need to carry manuals in the field Keep organized manually entered measurements