Description

Fluke 87V Offers
Identifies complex signal problems fast

Provides the resolution and accuracy to efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment. On top of that, this industrial multimeter effectively performs in loud, high energy, and high altitude locations. Features a low pass filter which supports precise frequency measurements on VFDs and acquires intermittents as quickly as 250 µS.

Use this multimeter to measure AC currents up to 10 A directly. Also, features a built-in thermometer that enables you to take temperature readings without having to carry a separate instrument and more. Plus, comes with a bright, two-level backlit display which allows you to see the results better in dim light.

Correctly measure pulse-width modulated motor drive signal

Takes the guesswork out of drive system troubleshooting. Includes a unique function for accurately measuring noisy at the VFD and at the motor terminals. Special shielding blocks high frequency, high-energy noise generated by large drive systems.

Electrical safety

All the inputs on this industrial multimeter are updated to the third and CAT III, 1000 V. They are designed to withstand spikes in excess of 8 V.

Features

Rugged, high accuracy industrial multimeter to measure current, voltage and frequency on complex variable frequency drive (VFD) signals
True-RMS AC voltage and current for measuring non-linear signals
Captures intermittents as short as 250 µS
Safety rated CAT III 1000 V, CAT IV 600 V
Built-in thermometer and temperature probe
Easy access door for fast battery changes without breaking the calibration seal
Removable holster with built in test lead and probe storage for convenience
Audible Input Alert warning against wrong use of input jacks
Provides peak capture and Min/Max/Avg recording
Designed and built in the U.S.
6000 counts, 3-3/4 digit resolution, or 20,000 counts, 4-1/2 digit—resolution
Fits into an optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
Includes an analog bar graph for fast changing or unstable signals
Presents a large digit display with bright, two-level backlight for easier reading in low light
Delivers 0.05% DC accuracy
Measures up to 1000 VAC and DC
10,000 µF capacitance range for components and motor caps
Relative mode to remove test lead interference from low ohms measurements
Auto and manual ranging for maximum flexibility
Touch hold to capture stable readings of noisy signals
Two-level backlit display

Applications

Motor drives
Plant automation
Power distribution
Electromechanical equipement

REED R2300 Infrared Thermometer
This infrared thermometer features a 12:1 distance to spot ratio and is capable of measuring temperatures up to 752°F (400°C). The R2300 is an affordable non-contact measurement solution able to quickly and efficiently measure the temperature of hot, hazardous or hard-to reach objects from a safe distance.

Features

Built-in laser pointer identifies target area
User selectable °F or °C
12:1 distance to spot size ratio
Digitally adjustable emissivity
Max and Min readings
Backlit display
High and low alarms
Low battery indication and auto shut off

Applications

Verify mechanical (bearings, motors) or electrical (circuit breaker boxes) equipment
Calibration and control of heater and oven temperatures
Monitoring materials in processes involving heating and/or cooling
Quality control monitoring
Research and development applications
Automotive diagnostics
Conduct HVAC/R energy audits

How to choose the best DMM for your job?
Multimeter Selection GuideFluke 87V Offers
Identifies complex signal problems fast

Provides the resolution and accuracy to efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment. On top of that, this industrial multimeter effectively performs in loud, high energy, and high altitude locations. Features a low pass filter which supports precise frequency measurements on VFDs and acquires intermittents as quickly as 250 µS.

Use this multimeter to measure AC currents up to 10 A directly. Also, features a built-in thermometer that enables you to take temperature readings without having to carry a separate instrument and more. Plus, comes with a bright, two-level backlit display which allows you to see the results better in dim light.

Correctly measure pulse-width modulated motor drive signal

Takes the guesswork out of drive system troubleshooting. Includes a unique function for accurately measuring noisy at the VFD and at the motor terminals. Special shielding blocks high frequency, high-energy noise generated by large drive systems.

Electrical safety

All the inputs on this industrial multimeter are updated to the third and CAT III, 1000 V. They are designed to withstand spikes in excess of 8 V.

Features

Rugged, high accuracy industrial multimeter to measure current, voltage and frequency on complex variable frequency drive (VFD) signals
True-RMS AC voltage and current for measuring non-linear signals
Captures intermittents as short as 250 µS
Safety rated CAT III 1000 V, CAT IV 600 V
Built-in thermometer and temperature probe
Easy access door for fast battery changes without breaking the calibration seal
Removable holster with built in test lead and probe storage for convenience
Audible Input Alert warning against wrong use of input jacks
Provides peak capture and Min/Max/Avg recording
Designed and built in the U.S.
6000 counts, 3-3/4 digit resolution, or 20,000 counts, 4-1/2 digit—resolution
Fits into an optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
Includes an analog bar graph for fast changing or unstable signals
Presents a large digit display with bright, two-level backlight for easier reading in low light
Delivers 0.05% DC accuracy
Measures up to 1000 VAC and DC
10,000 µF capacitance range for components and motor caps
Relative mode to remove test lead interference from low ohms measurements
Auto and manual ranging for maximum flexibility
Touch hold to capture stable readings of noisy signals
Two-level backlit display

Applications

Motor drives
Plant automation
Power distribution
Electromechanical equipement

REED R2300 Infrared Thermometer
This infrared thermometer features a 12:1 distance to spot ratio and is capable of measuring temperatures up to 752°F (400°C). The R2300 is an affordable non-contact measurement solution able to quickly and efficiently measure the temperature of hot, hazardous or hard-to reach objects from a safe distance.

Features

Built-in laser pointer identifies target area
User selectable °F or °C
12:1 distance to spot size ratio
Digitally adjustable emissivity
Max and Min readings
Backlit display
High and low alarms
Low battery indication and auto shut off

Applications

Verify mechanical (bearings, motors) or electrical (circuit breaker boxes) equipment
Calibration and control of heater and oven temperatures
Monitoring materials in processes involving heating and/or cooling
Quality control monitoring
Research and development applications
Automotive diagnostics
Conduct HVAC/R energy audits

How to choose the best DMM for your job?
Multimeter Selection Guide

Fluke 87V-KIT6 Specifications

Voltage DC
Max voltage: 1000 V

Accuracy: ±(0.05% + 1)

Maximum resolution: 10 µV

Voltage AC
Max voltage: 1000 V

Accuracy: ±(0.7% + 2) True RMS

AC bandwidth: 20 kHz with low pass filter; 3 db @ 1 kHz

Maximum resolution: 0.1 mV

Current DC
Maximum amps: 10 A (20 A for 30 seconds maximum)

Amps accuracy: ±(0.2% + 2)

Maximum resolution: 0.01 µA

Current AC
Maximum amps: 10 A (20 A for 30 seconds maximum)

Amps accuracy: ±(1.0% + 2) True RMS

Maximum resolution: 0.1 µA

Resistance
Maximum resistance: 50 MΩ

Accuracy: ±(0.2% + 1)

Maximum resolution: 0.1 Ω

Capacitance
Maximum capacitance: 9999 µF

Accuracy: ±(1% + 2)

Maximum resolution: 0.01 nF

Frequency
Maximum frequency: 200 kHz

Accuracy: ±(0.005% + 1)

Maximum resolution: 0.01 Hz

Temperature Measurement
-328 to 1994°F (-200 to 1090°C) excluding probe

80 BK Temperature Probe
-40 to 500°F (-40 to 260°C), 2.2°C or 2% whichever is greater

Operating Temperature
-4 to 131°F (-20 to 55°C)

Storage Temperature
-40 to 140°F (-40 to 60°C)

Operating Altitude
6561′ (2000 m)

Dimensions
7.9 x 3.9 x 2.05″ (201 x 98 x 52 mm)

Weight
0.8 lb (355 g)

Click here for complete specifications on the Fluke 87V-KIT6

This Fluke 87-5-KIT6 Industrial TRMS Multimeter Kit Includes

Fluke 87V True-RMS Multimeter with Temperature

Industrial multimeter that delivers accurate frequency measurements on adjustable speed drives. CAT III 1000V, CAT IV 600V safety rated.

REED R2300 Infrared Thermometer

Fast responding entry-level infrared thermometer with min/max temperature readings and adjustable high/low temperature alarms.

What’s included with the Fluke 87V-KIT6
Industrial Multimeter
TL75 Test Leads
AC72 Alligator Clips
80BK Temperature Probe
Holster
9V Battery (Installed)
Getting Started Manual
Operators Guide
Lifetime Warranty

Webinar: EVSE Safety Maintenance with Fluke

In recent years, more people are opting for greener solutions to minimize environmental damage, which has led to an increased demand for environmentally safe solutions such as electric vehicles. Naturally, this has led to an increase in the installation of EV charging stations, but also the risks for technicians. In 2020, there were 126 fatal and 2200 non-fatal electrical injuries. Many of these are caused when technicians are exposed to hazardous voltage and arc faults that could cause shock and fire hazards due to a lack of understanding of proper EVSE installation and maintenance. Considering that EVSEs have a high rate of failure, estimated at 30 to 50% (SAE), reliability is essential when building EV infrastructure and gaining user acceptance.

Fluke: How-To Check Power Quality With A Multimeter

This video will serve as a how-to on checking the power quality with a multimeter; specifically the 87V. One of the ways to check the power quality, is by using the peak Min/Max.

Fluke: How-To Test Fuses in A Multimeter

This video will serve as a how-to on testing fuses in multimeters; specifically the 87V & 233. Without having to open the case, you can change your setting to the Ohm function and jump from the Ohm jack to the Amp jack to measure across the fuse and see its continuity.

Fluke: How-To Measure Frequency and Duty Cycle With The 87V Industrial Multimeter

The 87V has many advanced measurements such as the frequency and duty cycle and this video shows you, the user, how simple it is to measure these with this instrument.

Fluke: What Is Peak MIN/MAX and How Do I Use It

If you have a multimeter, you need to know what peak Min/Max is. This video explains this feature using the 87V multimeter.

Fluke: How-To Configure A Multimeter To Use AC And AC/DC Current Clamps

This video will serve as a how-to on extending the life of your Fluke multimeter by using AC and AC/DC current capabilities. The step-by-step process shown here will have you configuring your instrument in no time at all!

Fluke: How-To Repair Fading Digits in the 87V Industrial TRMS Multimeter

If the digits are fading or not lighting up on your 87V, this video will serve as a how-to on fixing these issues.