Description

Fluke SMFT-1000/KIT OffersAll-in-one test solution that provides a complete PV testing solution that conforms to IEC 62446-1 standard.FeaturesCritial testing features for periodic inspection of PV systemsFull-sequence safety testing – IEC 62446-1 Category 1: Protective resistance earth RLO, voltage on open circuit (including polarity VOC), short circuit current ISC, and insulation resistance RINSSystem performance testing – IEC 62446-1 Category 2: I-V curve tracing and software analysis with TruTest (sold separately), and irradiance, temperature, tilt, cardinal directionColor screen with integrated interface: On-screen instructions provide any easy walkthrough of testsKeep the leads: Quick and accurate testing saves time and moneyIt’s a hassle to change the configuration of test leads constantly while doing different tests. With the “keep the leads” system, less time is wasted on set-up, and less user errors occur while testing PV systems. Now you can get more testing done in the field in less time.Automatic testing saves timeSwitch this unit to auto test mode to perform an automatic sequence of tests in a variety of combinations:With insulation test or without insulation testIEC 62446-1 testing for Category 1 or Category 1 and 2IEC 62446-1 testing for Protection Class I or Protection Class IIOn-location I-V curve results: Compare manufacturer I-V curve data to measured data instantlyWhile taking an I-V curve reading in the field, this tester will display the curve as it loads in the test data, against the module specifications as defined by the manufacturer. This makes it easy to immediately confirm measurements without the use of a laptop or tablet. Run the I-V curve test on new installations to confirm they are working according to the site specifications, or to test if existing modules or strings are working to their expected performance levels.Visual inspectionTo meet PV system IEC regulations for visual inspections, this tester features a convenient setting in which to record observations directly to the memory. Later, the information can be downloaded to the TruTest software (sold separately) and incorporated into the project report.Recommended toolsTruTest Data Management and Reporting Software393 FC CAT III True RMS Wireless Clamp Meter87V MAX True RMS Digital Multimeter1587 FC Insulation MultimeterTi480 PRO Infrared Camera1625-2 GEO Earth Ground Tester500 Series Battery AnalyzersPomona PVLEAD3 MC4 Solar Clamp Test Lead SetApplicationsPV professionalsCommercial and industrial installation contractorsResidential contractors and solar technicians Solar installation, commissioning and maintenance companies Utility companies and technicians Engineering, procurement and construction technicians Operations and maintenance field technicians Third party service techniciansFluke SMFT-1000/KIT OffersAll-in-one test solution that provides a complete PV testing solution that conforms to IEC 62446-1 standard.FeaturesCritial testing features for periodic inspection of PV systemsFull-sequence safety testing – IEC 62446-1 Category 1: Protective resistance earth RLO, voltage on open circuit (including polarity VOC), short circuit current ISC, and insulation resistance RINSSystem performance testing – IEC 62446-1 Category 2: I-V curve tracing and software analysis with TruTest (sold separately), and irradiance, temperature, tilt, cardinal directionColor screen with integrated interface: On-screen instructions provide any easy walkthrough of testsKeep the leads: Quick and accurate testing saves time and moneyIt’s a hassle to change the configuration of test leads constantly while doing different tests. With the “keep the leads” system, less time is wasted on set-up, and less user errors occur while testing PV systems. Now you can get more testing done in the field in less time.Automatic testing saves timeSwitch this unit to auto test mode to perform an automatic sequence of tests in a variety of combinations:With insulation test or without insulation testIEC 62446-1 testing for Category 1 or Category 1 and 2IEC 62446-1 testing for Protection Class I or Protection Class IIOn-location I-V curve results: Compare manufacturer I-V curve data to measured data instantlyWhile taking an I-V curve reading in the field, this tester will display the curve as it loads in the test data, against the module specifications as defined by the manufacturer. This makes it easy to immediately confirm measurements without the use of a laptop or tablet. Run the I-V curve test on new installations to confirm they are working according to the site specifications, or to test if existing modules or strings are working to their expected performance levels.Visual inspectionTo meet PV system IEC regulations for visual inspections, this tester features a convenient setting in which to record observations directly to the memory. Later, the information can be downloaded to the TruTest software (sold separately) and incorporated into the project report.Recommended toolsTruTest Data Management and Reporting Software393 FC CAT III True RMS Wireless Clamp Meter87V MAX True RMS Digital Multimeter1587 FC Insulation MultimeterTi480 PRO Infrared Camera1625-2 GEO Earth Ground Tester500 Series Battery AnalyzersPomona PVLEAD3 MC4 Solar Clamp Test Lead SetApplicationsPV professionalsCommercial and industrial installation contractorsResidential contractors and solar technicians Solar installation, commissioning and maintenance companies Utility companies and technicians Engineering, procurement and construction technicians Operations and maintenance field technicians Third party service technicians

Fluke SMFT-1000/KIT Specifications

Protective Conductor Resistance RLO

Display Range
0 to 19.99 Ω
20 to 199.9 Ω
200 to 2000 Ω

Measuring Range
0.20 to 19.99 Ω
20 to 199.9 Ω
200 to 2000 Ω

Resolution
0.01/0.1/1 Ω

Accuracy
±(2% + 2 digits)
±(2% + 2 digits)
±(5% + 2 digits)

Test
Current: ≥200 mA (≤2 Ω + Rcomp)
Voltage: 4 to 10 V DC
Lead zero (Rcomp): Up to 3 Ω

Polarity Reversing
Yes

PV Module/PV String, Open-Circuit Voltage (Voc)

Display Range
0 to 99.9 V
100 to 1000 V

Measuring Range
5 to 99.9 V
100 to 1000 V

Resolution
0.1/1 V

Accuracy
±(0.5% + 2 digits)
±(0.5% + 2 digits)

Polarity Test
Yes

PV Module/PV String, Short-Circuit Current (Is/c)

Display Range
0 to 20 A

Measuring Range
0.2 to 20 A

Resolution
0.1 A

Accuracy
±(1% + 2 digits)

Insulation Resistance RINS

Display Range
0 to 99.99 MΩ
100 to 199.9 MΩ
200 to 999 MΩ
Testing current: Minimum: 1 mA (at 250 kΩ/500 kΩ/1 MΩ); Maximum: 1.5 mA (short circuit)

Measuring Range
0.20 to 99.99 MΩ
100 to 199.9 MΩ
200 to 999 MΩ

Resolution
0.01/0.1/1 Ω

Accuracy
±(5% + 5 digits)
±(10% + 5 digits)
±(20% + 5 digits)

Test Voltage at No Load
Measuring range: 50/100/250 V up to 199.9 MΩ; 500/1000 V up to 999 MΩ
Resolution: 1 V
Accuracy: 0 to 20%

Test Voltage at ≥1 mA
Measuring range: 250 V at 250 kΩ; 500 V at 500 kΩ; 1000 V at 1 MΩ
Resolution: 1 V
Accuracy: 0 to 10%

Testing Current
Minimum: 1 mA (at 250 kΩ/500 kΩ/1 MΩ)
Maximum 1.5 mA (short circuit)

General Specifications

Temperature
Operating: 32 to 122°F (0 to 50°C)
Storage: -22 to 140°F (30 to 60°C)

Altitude
Up to 6561.68’/2000 m (operating and storage)

Battery
6 AA IEC LR6

Safety
IEC 61010-1 Pollution°2
IEC 61010-2-034 CAT III 1000 V DC, CAT III 700 V AC

Electromagnetic Compatibility (EMC)
IEC 61326-1: Portable Electromagnetic Environment, CISPR 11: Group 1, Class A
Group 1: Equipment has intentionally generated and/or uses conductively-coupled radio frequency energy that is necessary for the internal function of the equipment itself
Class A: Equipment is suitable for use in all establishments other than domestic and those directly connected to a low-voltage power supply network that supplies buildings used for domestic purposes. There may be potential difficulties in ensuring electromagnetic compatibility in other environments due to conducted and radiated disturbances
Caution: This equipment is not intended for use in residential environments and may not provide adequate protection to radio reception in such environments.

Wireless Radio Module
Frequency range: 2.402 to 2.48 GHz
Output power: 8 dBm

Dimensions
3.8 x 9.8 x 4.9″ (10 x 25 x 12.5 cm)

Weight
3.09 lbs (1.4 kg)

Click here for complete specifications on the Fluke SMFT-1000/KIT

What’s included with the Fluke SMFT-1000/KIT
Multifunction PV Tester and Performance Analyzer
Solar Irradiance Meter

External Temperature Probe
Mounting Bracket
Carrying Case

AC/DC Current Clamp with Magnet Set
Test Probe with Remote Test Button
Test Lead Set with Alligator Clips and Test Probes
2 x MC4 Test Lead Sets
Test Lead on Reel
Coupler Set
Fuse Pack
Zero Adapter
IRDA Optical USB Adapter
Neck and Waist Carrying Strap
Backpack with Foam Insert
Printed Safety Guides and Instruction Sheets
Three-Year Warranty

Webinar: Solar Trends and Troubleshooting PV Systems with Fluke

In recent years, more and more people are opting for greener solutions to minimize environmental damage, which has led to an increased demand for environmentally safe solutions. As such, there are more efforts being made on using solar energy in various segments of our society. These changes also entail the need for tools that improve testing and troubleshooting solar solutions.