Description

Fluke TiS55+ Offers

Become proactive instead of reactive! For starters, this camera offers features that make it easy to set up your image organization, inspection routines, and you can start implementing a successful PM program.

Features

Measure up to 1022°F 550°C)
256 x 192 infrared resolution
Touchscreen IR Fusion™
Manual and fixed focus
Rugged, reliable, and accurate
Water and dust resistant IP54)
Engineered to withstand a 6.56′ 2 m) drop
Asset Tagging
IR-PhotoNotes
Voice annotation
Fluke Connect

Be proactive instead of reactive

Take your plan for a proactive maintenance PM) program and turn it into reality. To get started, you need features that make it easy to set up your image organization and inspection routines. With this thermal imager, you’re well on your way to implementing a successful PM program.

Ditch the clipboard
With so many inspections in your day, it can be hard to remember what you saw and where you inspected. Maybe you carry around a clipboard to jot down notes. This thermal camera comes with built-in personal assistants, which means you can finally ditch the clipboard and have all the information you need embedded in the images you save, including:

Voice annotation

Record up to 60 seconds per thermal image
Identify exactly what you see in real time

IR-PhotoNotes

Take photos of asset numbers and other identifiers
Use as a reference when looking at the thermal image on your computer

Asset Tagging

Sort your thermal images by asset
Scan a QR code on your asset, then start capturing thermal images
Images will automatically be sorted by asset, simply connect your camera to your computer to view them

Applications

Preventative and predictive maintenance
Equipment troubleshooting
Building diagnostics
Research and development

The importance of image quality in thermography

When conducting infrared inspections, high-quality images that allow for better analysis, presentation, and professionalism are essential.
With a sharply focused image, there is a distinct contrast between areas of varying thermal energy on the surface being inspected. This allows the individual detector elements also known as pixels) to clearly report the intensity of the energy being focused on them.
When the focus is poor, the incoming energy isn’t as concentrated on individual detectors, and their response is skewed. This can lead to temperature measurements that are significantly off, resulting in expensive downtime and possible safety hazards.
Thermal imagers are made with 100% diamond-turned germanium lenses covered with a specialty coating, providing premium quality images.

LaserSharp Auto Focus allows you to select and focus on a specific target

Easily choose and focus on your target
LaserSharp™ Auto Focus uses a built-in laser distance meter that provides both speed and precision. The laser-driven target detection pinpoints the target while the camera focuses to capture a precise, high-quality image. With LaserSharp Auto Focus, you can:

Easily capture high-quality, focused images of your desired target with the push of a button
Take infrared images through common obstacles like chain link fences
Avoid skewed temperature measurements by precisely choosing your target
Perform the same inspections multiple times as a part of your preventive maintenance program – the built-in laser distance meter calculates and displays how far you are from your target, making repeatability much easier

Choose multiple targets at different distances
MultiSharp™ Focus takes multiple images from different focal distances and combines them into one clear image. With a simple point and shoot, you can go from being completely out of focus, to complete focus, throughout the field of view. With MultiSharp:

Reduce the need to take individual images of targets that are in the camera’s field of view – focus on one target, and all objects that are in the camera’s field of view will be in focus
Cut downtime spent taking multiple images to increase productivity
Capture quality, in-focus images, even under direct sunlight

1.Middleground in focus

2.Foreground in focus

3.Background in focus

Shoot from a distance
Infrared inspections can take you into multiple types of environments with many types of equipment. Interchangeable lenses that require no calibration give you the versatility and the image quality needed to conduct inspections in almost any environment.

Reduce the need to enter the danger zone with a 2x telephoto lens
Identify potential issues as small and distant as a failed splice on a high electrical line from the ground with a 4x telephoto lens
Save time with roofing and industrial building inspections by viewing a large area at one time with a wide-angle lens

High voltage power pole, captured with a TiX560 camera and standard lens

The same power pole captured from the same distance, but with a 2x telephoto lens

The same power pole captured from the same distance, but with a 4x telephoto lens

Easily manage and analyze your data

Whether you are troubleshooting or conducting maintenance inspections, having easy access to more information faster is always a big benefit.

Document information on the equipment you’re inspecting
With IR PhotoNotes™, voice or text annotation, you can easily document critical information about each piece of equipment and its location. Each “note” attaches to the image, so you never have to search or match up notes to images.

Document critical information with your infrared image
Capture surrounding details like wind conditions and time of day
Identify asset location

Image Info

IR Sensor Size
320 x 240

Distance to Target
0.69 m

Main Image Markers

Name
Temperature

Centerpoint
29.1°C

Capture digital and infrared images at once
IR Fusion™ technology combines visible light and an infrared image into one, giving you better clarity.

Get exact location details in picture-in-picture mode, which provides the center part of the display in IR and the remainder of the image in visible light
See more details when you adjust the level of infrared and visible light blending in AutoBlend™ mode
Isolate problem areas with user-defined temperature ranges with IR color alarms

IR Fusion picture-in-picture mode: Ironbow palette

IR Fusion picture-in-picture mode: AutoBlend

IR Fusion color alarm

ROI and thermal imaging

Seven benefits of on-site infrared inspections

Reduce downtime

Inspections can be done while equipment is running – no lost production time.

Protect lives while doing more

The non-contact nature of infrared inspections allows technicians to scan large areas quickly, from a safer distance away. That means technicians can inspect more equipment faster.

Improve production efficiency

Subtle problems are found and addressed before they have a major impact on production.

Document before and after

Validate post-maintenance work and capture the results for future review.

Reduce capital expenses

Finding and repairing problems at an early stage can improve the life expectancy of equipment, as a result extending replacement intervals.

Increase productivity

Quickly scan a large area to find air leaks, insulation gaps, moisture and overheated electrical components to complete more work in less time.

Identify work in easy-to-understand terms

See exactly what the problem is on the camera, eliminating guesswork and making it easier for everyone to see what repairs needs to be done.

Review thermal images side by side, making it easy to compare today’s reading with the baseline or other historical images. Fluke TiS55+ Offers

Become proactive instead of reactive! For starters, this camera offers features that make it easy to set up your image organization, inspection routines, and you can start implementing a successful PM program.

Features

Measure up to 1022°F 550°C)
256 x 192 infrared resolution
Touchscreen IR Fusion™
Manual and fixed focus
Rugged, reliable, and accurate
Water and dust resistant IP54)
Engineered to withstand a 6.56′ 2 m) drop
Asset Tagging
IR-PhotoNotes
Voice annotation
Fluke Connect

Be proactive instead of reactive

Take your plan for a proactive maintenance PM) program and turn it into reality. To get started, you need features that make it easy to set up your image organization and inspection routines. With this thermal imager, you’re well on your way to implementing a successful PM program.

Ditch the clipboard
With so many inspections in your day, it can be hard to remember what you saw and where you inspected. Maybe you carry around a clipboard to jot down notes. This thermal camera comes with built-in personal assistants, which means you can finally ditch the clipboard and have all the information you need embedded in the images you save, including:

Voice annotation

Record up to 60 seconds per thermal image
Identify exactly what you see in real time

IR-PhotoNotes

Take photos of asset numbers and other identifiers
Use as a reference when looking at the thermal image on your computer

Asset Tagging

Sort your thermal images by asset
Scan a QR code on your asset, then start capturing thermal images
Images will automatically be sorted by asset, simply connect your camera to your computer to view them

Applications

Preventative and predictive maintenance
Equipment troubleshooting
Building diagnostics
Research and development

The importance of image quality in thermography

When conducting infrared inspections, high-quality images that allow for better analysis, presentation, and professionalism are essential.
With a sharply focused image, there is a distinct contrast between areas of varying thermal energy on the surface being inspected. This allows the individual detector elements also known as pixels) to clearly report the intensity of the energy being focused on them.
When the focus is poor, the incoming energy isn’t as concentrated on individual detectors, and their response is skewed. This can lead to temperature measurements that are significantly off, resulting in expensive downtime and possible safety hazards.
Thermal imagers are made with 100% diamond-turned germanium lenses covered with a specialty coating, providing premium quality images.

LaserSharp Auto Focus allows you to select and focus on a specific target

Easily choose and focus on your target
LaserSharp™ Auto Focus uses a built-in laser distance meter that provides both speed and precision. The laser-driven target detection pinpoints the target while the camera focuses to capture a precise, high-quality image. With LaserSharp Auto Focus, you can:

Easily capture high-quality, focused images of your desired target with the push of a button
Take infrared images through common obstacles like chain link fences
Avoid skewed temperature measurements by precisely choosing your target
Perform the same inspections multiple times as a part of your preventive maintenance program – the built-in laser distance meter calculates and displays how far you are from your target, making repeatability much easier

Choose multiple targets at different distances
MultiSharp™ Focus takes multiple images from different focal distances and combines them into one clear image. With a simple point and shoot, you can go from being completely out of focus, to complete focus, throughout the field of view. With MultiSharp:

Reduce the need to take individual images of targets that are in the camera’s field of view – focus on one target, and all objects that are in the camera’s field of view will be in focus
Cut downtime spent taking multiple images to increase productivity
Capture quality, in-focus images, even under direct sunlight

1.Middleground in focus

2.Foreground in focus

3.Background in focus

Shoot from a distance
Infrared inspections can take you into multiple types of environments with many types of equipment. Interchangeable lenses that require no calibration give you the versatility and the image quality needed to conduct inspections in almost any environment.

Reduce the need to enter the danger zone with a 2x telephoto lens
Identify potential issues as small and distant as a failed splice on a high electrical line from the ground with a 4x telephoto lens
Save time with roofing and industrial building inspections by viewing a large area at one time with a wide-angle lens

High voltage power pole, captured with a TiX560 camera and standard lens

The same power pole captured from the same distance, but with a 2x telephoto lens

The same power pole captured from the same distance, but with a 4x telephoto lens

Easily manage and analyze your data

Whether you are troubleshooting or conducting maintenance inspections, having easy access to more information faster is always a big benefit.

Document information on the equipment you’re inspecting
With IR PhotoNotes™, voice or text annotation, you can easily document critical information about each piece of equipment and its location. Each “note” attaches to the image, so you never have to search or match up notes to images.

Document critical information with your infrared image
Capture surrounding details like wind conditions and time of day
Identify asset location

Image Info

IR Sensor Size
320 x 240

Distance to Target
0.69 m

Main Image Markers

Name
Temperature

Centerpoint
29.1°C

Capture digital and infrared images at once
IR Fusion™ technology combines visible light and an infrared image into one, giving you better clarity.

Get exact location details in picture-in-picture mode, which provides the center part of the display in IR and the remainder of the image in visible light
See more details when you adjust the level of infrared and visible light blending in AutoBlend™ mode
Isolate problem areas with user-defined temperature ranges with IR color alarms

IR Fusion picture-in-picture mode: Ironbow palette

IR Fusion picture-in-picture mode: AutoBlend

IR Fusion color alarm

ROI and thermal imaging

Seven benefits of on-site infrared inspections

Reduce downtime

Inspections can be done while equipment is running – no lost production time.

Protect lives while doing more

The non-contact nature of infrared inspections allows technicians to scan large areas quickly, from a safer distance away. That means technicians can inspect more equipment faster.

Improve production efficiency

Subtle problems are found and addressed before they have a major impact on production.

Document before and after

Validate post-maintenance work and capture the results for future review.

Reduce capital expenses

Finding and repairing problems at an early stage can improve the life expectancy of equipment, as a result extending replacement intervals.

Increase productivity

Quickly scan a large area to find air leaks, insulation gaps, moisture and overheated electrical components to complete more work in less time.

Identify work in easy-to-understand terms

See exactly what the problem is on the camera, eliminating guesswork and making it easier for everyone to see what repairs needs to be done.

Review thermal images side by side, making it easy to compare today’s reading with the baseline or other historical images.

Fluke TiS55+ Specifications

Key Specifications

Infrared Resolution
256 x 192 49,152 pixels)

IFOV
1.91 mRad

Field of View
28 x 20°

Minimum Focus Distance
1.64′ 0.5 m)

Focus System
Manual focus and 1 meter focus marker

Asset Tagging
Scan a QR code to automatically organize and file thermal images with Fluke Connect™

IR-Fusion Technology
AutoBlend continuous 0 to 100%. Adds the context of the visible details to your infrared image

Picture-In-Picture PIP)
Yes

Display
3.5″ 8.9 cm landscape) touchscreen 640 x 480 LCD

Thermal Sensitivity
40 mk

Level and Span
Smooth auto and manual scaling

Fast Auto-Rescale in Manual Mode
Yes

Minimum Span
Manual mode: 4.5°F 3°C)

Auto mode: 9°F 5°C)

Built-in Digital Camera Visible Light)
Up to 5mp

Frame Rate
27 Hz

Data Storage and Image Capture

Memory
Internal: ~500 images

External: ≥4 GB SD card >1000 images)

Image File Formats
Non-radiometric BMP or JPEG or fully-radiometric IS2

Memory Review
Yes

Software
Fluke Connect software – full analysis and reporting software with access to the Fluke Connect

Voice Annotation
Yes, 60 second maximum audio recording via Bluetooth Audio Headset Profile HSP) connection to external device

IR-PhotoNotes
Yes. Up to 1 extra user-selectable visible light image capture to be included in IS2 file

Text Annotations
After IS2 capture, user can type in a note using on-screen keyboard

Auto Capture Temperature and Interval)
Yes. User-selectable time interval for capturing IS2 or Jpeg files

Temperature Measurement

Temperature Range
Not Calibrated Below 14°F [-10°C])
-4 to 1022°F -20 to 550°C)

Accuracy
±35.6°F or 2% whichever is greater) at 77°F ambient temperature

±2°C or 2% whichever is greater) at 25°C ambient temperature

On-Screen
Emissivity correction: Yes, “top ten” material list plus numerical adjustment between 0.01 and 1

Reflected background temperature compensation: Yes

Transmission correction: Yes

General Specifications

Temperature
Operating: 14 to 122°F -10 to 50°C)

Storage: -4 to 122°F -20 to 50°C) without batteries

Relative Humidity
10 to 95% non-condensing

Infrared Spectral Band
~8 to 14 μm

Standard Palettes
6

Color Alarms
Yes. User-selectable hot and cold point and internal/external range color alarms. Modifies palettization of IR image by limiting which pixels are drawn using palette colors based on the pixel temperature

Spot Temperature
Center spot unmovable)

User-Definable Spot Markers
Yes, 3 user-adjustable spot markers for a single pixel each. Position is adjustable. Temperature
value for marker shown on screen. User can choose to switch display on/off for each marker

User Defined Measurement Boxes
Yes, 3 user-adjustable rectangles. Size and position are adjustable. Rectangle statistics shown on screen: Minimum, maximum, average temperature. User can choose to switch display on/off for each marker

Safety Standards
IEC 61010-1: Pollution Degree 2

Electromagnetic Compatibility
IEC 61326-1: Portable Electromagnetic Environment; IEC 61326-2-2 CISPR 11: Group 1, Class A

Vibration
10 to 150 Hz, 0.15 mm, IEC 60068-2-6

Shock
30 g, 11 ms, IEC 60068-2-27

Drop
Engineered to withstand 6.56′ 2 m) drop

Battery
Type field-replaceable, rechargeable): Lithium-ion rechargeable battery

Life: ≥3.5 hours continuous without WiFi actual life depends on settings and usage)
Charging time: ≤2.5 hours to full charge

AC operation: AC operation with included power supply, universal adapters included output: 15 VDC, 2 A

Power saving: User-selectable sleep and power off

Enclosure Rating
IP54

Supported Languages
Czech, Dutch, English, Finnish, French, German, Hungarian, Italian, Japanese, Korean, Polish, Portuguese, Russian, Simplified Chinese, Spanish, Swedish, Traditional Chinese, and Turkish

RoHS Compliant
Yes

Dimensions
~10.5 x 4 x 5.7″ 26.7 x 10.1 x 14.5 cm)

Weight
≤5 lbs 2.27 kg), including batteries

Click here for complete specifications on the Fluke TiS55+

What’s included with the Fluke TiS55+
Thermal Camera
4 GB Micro SD Card
USB Cable
Rugged Hard Carrying Case
Soft Transport Bag
Adjustable Hand Strap
AC Adapter Supply Including Universal AC Adapters)
Rugged Lithium-Ion Battery
Two-Year Warranty

Model

Fluke
TiS75+

Fluke
TiS60+

Fluke
TiS55+

Fluke TiS20+

Fluke TiS20+ MAX

Infrared resolution
384 x 288
110,592 pixels)
320 x 240
76,800 pixels)
256 x 192
49,152 pixels)
120 x 90
10,800 pixels)

IFOV
spatial resolution)
1.91 mRad
1.86 mRad
1.91 mRad
7.6 mRad

Field of view
42°H x 30°V
34.1 °H x 25.6°V
28°H x 20°V
50°H x 38°V

Distance to spot

130:1

Thermal sensitivity*
Target temp at or
over 0°C 40 mk)
≤ 0.045 at 30°C
target temp 45 mK)
Target temp at or
over 0°C 40 mk)
Target temp at or
over 0°C 60 mK)

Temperature range
-4 to 1022°F
-20 to 550°C)
not calibrated below -10°C)
-4 to 752°F
-20 to 400°C)
-4 to 1022°F
-20 to 550°C)
not calibrated below -10°C)
TiS20+
-4 to +302°F
-20 to 150°C)

TiS20+ MAX
-4 to +752°F
-20 to 400°C)

Focus system
Manual focus plus focus free operation
for distances >0.5m via focus marker
Fixed Focus
Manual focus, plus focus free operation
for distances >0.5m via focus marker
Fixed Focus

Level and span
Smooth auto and manual scaling

Optional lenses

Wireless connectivity**
Fluke Connect™ app compatible. Wireless connectivity to PC, iPhone® and iPad®
iOS 4s and later),
Android™ 4.3 and up, and WiFi to LAN

IR-Fusion®
AutoBlend continuous
0 to 100 %
Yes, 4 levels
0%, 25%, 50%, 75%, 100%
AutoBlend continuous
0 to 100 %
Continuous Touchscreen
IR-Fusion 0 to 100%

Display
3.5” 8.9 cm landscape)
touchscreen 640 x 480 LCD
3.5” 8.9 cm landscape)
320 x 240 LCD
3.5” 8.9 cm landscape)
touchscreen 640 x 480 LCD
3.5” 8.9 cm landscape)
touchscreen 320 x 240 LCD

Design
Pistol-grip design for one-handed use

Frame rate
9 or 27 Hz models
< 9 or 30 Hz 9 or 27 Hz models 9 Hz Software Full analysis and reporting software with access to Fluke Connect Desktop Voice annotation Yes, 60 second maximum audio recording via Bluetooth Audio Headset Profile HSP) connection to external device sold separately) 60 seconds maximum recording time per image; reviewable playback on camera; Bluetooth headset required sold separately) Yes, 60 second maximum audio recording via Bluetooth Audio Headset Profile HSP) connection to external device sold separately) Text annotation After IS2 capture, user can type in a note using on-screen keyboard. After IS2 capture, user can type in a note using on-screen keyboard. Yes. Including standard shortcuts as well as user programmable options Video recording Standard and radiometric video. Up to 5 minute recording length. avi and is 3 Battery life ≥ 3.5 hours continuous without WiFi Actual life depends on settings and usage) 4 hours continuous use per battery pack without WiFi) ≥ 3.5 hours continuous without WiFi Actual life depends on settings and usage) ≥ 5 hours continuous without WiFi) Remote control operation Alarms High temperature, low temperature, and dew point calculation High temperature, low temperature, isotherms within range) High temperature, low temperature Warranty 2 year warranty 2 year warranty 2 year warranty 2 year warranty Asset tagging Automatically organize and file thermal images by scanning QR codes Automatically organize and file thermal images by scanning QR codes Automatically organize and file thermal images by scanning QR codes *Best possible **Fluke Connect™ not available in all countries See it. Save it. Share it. All the facts, right in the field. Fluke engineers have delivered an innovative mobile platform and tool that helps solve everyday problems, allowing you to instantly document measurements, retrieve historical data, and share live measurements with your team. All handled by the Android™ or iOS smart phone you already carry. Fluke Connect with ShareLive™ video call is the only wireless measurement system that lets you stay in contact with your entire team without leaving the field. The Fluke Connect mobile app is works with over 20 different Fluke products - the largest suite of connected test tools in the world. Make the best decisions faster than ever before by viewing temperature, mechanical, electrical and vibration measurements for each equipment asset in one place. Get started saving time and increasing your productivity. Fluke Connect Features: TrendIt™ Graphs: Use graphing to show changes in measurements, allowing you to graph and show problems instantly. EquipmentLog™ History: Access equipment history building a database of equipment health and baselines with cloud backup. ShareLive™ Video Calls: Save, collaborate and share measurements instantly with your team anytime, from anywhere. AutoRecord™ Measurements: Instantly save measurements to your phone with Cloud backup. Fluke Cloud™ Storage: Securely access equipment records anywhere, anytime. Fluke Connect Benefits: Maximize uptime Minimize maintenance costs Better assessments with accurate records Higher efficiency with less walking around; no notebook and excel needed Share troubleshooting knowledge live Create and share helpful content in the field Access to Fluke digital product manuals means no need to carry manuals in the field Keep organized manually entered measurements 10 things you need to know about Thermal Imagers Whether you choose a simple point-and-shoot model or a high-end thermal imager with all the bells and whistles, here are some key features and specs you should consider: 1 Resolution Detector resolution indicates the number of detector pixels on the camera. More pixels, means higher resolution Spatial resolution is based on detector pixels and the field of view FOV) spec, combining them to define the area the imager sees at any given moment. Spatial resolution can be used to help define the smallest object size that can be detected. A lower spatial resolution value means better detail and image quality 2 Focus With a variety of focus mechanisms to choose from, it is important to take into account your skill level as well as the application in selecting a focus type. Here are the common focus mechanisms: Fixed: Point and shoot simplicity Manual: Precise incremental focus Auto focus: Automatically focuses on a target but may require manual adjustment Laser-assisted auto focus: Uses a built-in laser distance meter to calculate distance to the target Multifocal: Captures and stores multiple images of the target from varying focal distances and uses software to blend them into one image with ultra-sharp depth of field detail. Fluke Corp., for example, calls its implementation of this technology MultiSharp™ Focus 3 Temperature range The highest and lowest temperature you encounter in your inspection determines the temperature range you need from your thermal imager. Or, select a camera with a wide temperature range that automatically selects the range based on your scene, or allows you to manually select the temperature range. 4 Lens options A camera that lets you change lenses increases your versatility, allowing you to inspect many more types of equipment and situations. There are lots of choices for lots of applications—standard, wide angle, telephoto, and macro. 5 Saving images and additional data Save infrared and digital images and in some cases voice notes to internal memory, a removable SD card, or to a USB flash drive. It’s important to have the flexibility to save images and additional related data to different media for backup or sharing. TI450 SF6 6 Color palettes Slight differences are easier to see with a monochromatic palette, such as grayscale or amber. High contrast palettes can make it easier to quickly find obvious anomalies. You should be able to change the palette in the camera or in the software. 7 Color alarms Use these to quickly highlight areas outside your normal temperature ranges. 8 Emissivity and reflected temperatures Low emissivity surfaces, such as shiny metals, can reflect infrared energy from other objects and throw off your image and your measurement accuracy. So, look for the option to adjust parameters when choosing an imager. 9 Spot markers Mark specific temperatures on your image to compare simultaneous temperatures from multiple points on the same image. 10 Battery type and life Look for a battery with useful features such a charge level indicator. Nothing is worse than starting an inspection with no idea of the battery status. Also consider long battery life and quick charging ability. Check out the different color palettes available on your thermal imager! View your home through the eyes of a thermal imager and and see where the hot and cold s